Minimum PC Requirements for the i-HDS Software
||4 GB of RAM
|Hard Drive Space
||20 GB free
||1024 x 768, 16-bit color
||10/100 Mbps Ethernet or Wi-Fi equivalent with internet access
||32-bit or 64-bit versions of Microsoft Windows 7, 8, 8.1, or 10
||generic keyboard and pointing device
Vehicle Communication Interfaces (VCI)
The i-HDS software supports the use of a generic pass-thru VCI that is compliant with SAE J2534-1 and J2534-2. However, Honda recommends the Denso DST-i or the Bosch MVCI for use on Honda and Acura vehicles, as Honda has worked closely with these manufacturers to ensure their hardware and our software interact safely and within the J2534-1 and -2 specifications, for both diagnostics and reprogramming. If you choose to use a generic VCI, please carefully consider the customer and technical support options you will receive from your chosen device supplier. Honda does not provide technical or customer support for generic VCI devices.
The VCI Application Table below lists devices that either are approved and supported by Honda or are known to have completed and passed an independent, exhaustive validation program with i-HDS software suite.
||This is the current generation VCI used by Hondaand Acuradealers. Hondaroutinely validates the functionality and provides customer support for this device.
||This is the previous generation VCI used by Hondaand Acuradealers. Hondaroutinely validates the functionality and provides customer support for this device.
||This company has completed an independent i-HDS validation and claims it to function with the i-HDS software. Honda does not provide ongoing validation, nor customer support for this device.
||This company has completed an independent i-HDS validation and claims it to function with the i-HDSsoftware. Honda does not provide ongoing validation, nor customer support for this device.
* These versions may have been superseded. Honda provides the latest supported versions to current i-HDS subscribers.
** Version used in validation program. See Terms and Conditions and Important Notice Regarding Reprogramming below for more details.
Reprogramming with the J2534 Rewrite Application in i-HDS
Included in the i-HDS software suite is a new reprogramming application called J2534 Rewrite. This application is made available to all subscribers of the i-HDS software suite and replaces the previous generation software, J2534 Honda Pass-thru Reprogramming Software.
This new application is compatible with generic VCIs that comply with SAE J2534. It must be used to reprogram any Honda/Acura vehicle equipped with ECUs that support reprogramming. Refer to the table below for legacy applicability for the programming of ECMs and PCMs. Though system dependent, late-model vehicles may be equipped with other ECUs that support reprogramming as well, e.g. ABS or VSA. J2534 Rewrite must be used to reprogram these control modules, as instructed in an applicable service bulletin.
As shown in this table, not all legacy Honda/Acura models are equipped with a reprogrammable ECM/PCM. Furthermore, all 2007 and later models not listed in the table are fully supported with this application.
Terms and Conditions
The VCI Application Table above is voluntarily provided by Honda as a courtesy to its aftermarket customers. While the i-HDS software suite has been validated to be J2534 compliant by several third-party device manufacturers, it is the responsibility of the device manufacturer to ensure and maintain the interoperability of its device and our i-HDS software. Device manufacturers listed above that have completed an independent validation of i-HDS attest that those specific devices are both J2534compliant and work with the i-HDS suite. If Honda determines that a device listed above is no longer compliant with the J2534 standard or is not compatible with the i-HDS suite, Honda may elect to remove the device from the list without notice. Furthermore, the applicability scope of the devices above is limited to Honda/Acura vehicles intended for sale in North America. Device compatibility with Honda/Acura vehicles for sale outside of the North American market is not guaranteed and may not meet the standards of that market.
All reprogrammable Honda/Acura ECUs/ECMs/PCMs comply with the SAE J2534 standard. You are responsible for using a compliant J2534reprogramming device. Contact the reprogramming device manufacturer to confirm Honda/Acura compatibility before use.
Honda will NOT be responsible for damaged control units/modules.
HONDA MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, IN FACT OR IN LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL HONDA BE LIABLE FOR INCIDENTAL, SPECIAL OR CONSEQUENTIAL PENALTIES OR DAMAGES, INCLUDING LOST PROFITS.
These Terms & Conditions are subject to change without notice.
Important Notice Regarding Reprogramming
Do NOT program a control unit/module unless you are directed by a service procedure or an applicable Honda/Acura Service Bulletin. Control unit/module updating should only be undertaken by a skilled professional using proper equipment and procedures, or damage can occur. Updating control units/modules to the latest software not associated with a specific symptom may not resolve other specific customer concerns. Unauthorized or self-directed programming may cause unintended and irreversible effects and lead to vehicle harm and/or customer dissatisfaction.
Honda urges end users to always use the LATEST production release of the J2534 Rewrite software in the i-HDS suite. Using the latest version of the software is the best way to ensure successful reprogramming of applicable control units/modules.
It is possible to damage the vehicle’s electronic control units/modules during reprogramming. Ensure the following conditions are met BEFORE programming a control unit/module:
The vehicle battery must be fully charged before programming the control unit/module. Stable battery voltage is critical during programming. Any fluctuation, spiking, over voltage, or loss of voltage will interrupt programming.
Turn OFF or disable any system that may put a load on the vehicle battery.
Make certain all tool connections are secure. Do NOT disturb the tool harnesses while programming. If an interruption occurs during the reprogramming procedure, reprogramming failure or control unit/module damage may occur.
THE REPROGRAMMING PROCEDURE MUST BE FOLLOWED EXACTLY AS OUTLINED BY THE SOFTWARE AND/OR SERVICE INFORMATION. FAILURE TO FOLLOW THESE INSTRUCTIONS WILL CAUSE THE REPROGRAMMING EVENT TO FAIL.
Some units/modules may require additional programming/setup events performed before or after programming. Please refer to the appropriate Service Bulletins for details. (e.g. IMA Battery Module)
Warning: Certain control module systems require special procedures and or hardware to be properly reprogrammed.